Details

Fully 3D printable RC model of the finish attack plane, specially designed to meet ACES and EPA aircombat requirements, but also as a cheap and easy to build RC model for everyday flying. Many scale details such as armament, airframe plating or exhausts encourages to create realistic paint jobs. This plane has been designed for printing from foaming LW-PLA filament, that allow even the small printed planes to be as light as any other RC plane building technique. Get ready for battle with this great performing flying legend!

This model has been completely designed with a new LW PLA material by ColorFabb in mind. Parts printed from this LW PLA are light, easily sanded and glued together. This model requires only about 220 g of this material, that means it’s a very cheap build. In case of accident, parts can be easily reprinted with just a filament cost. We’ve been testing this material for half a year before this plane was released… The material is using an active foaming technology to achieve lightweight, low density PLA parts. At around 230°C this material will start foaming, increasing its volume by nearly 3 times. All parts of this plane should be printed from LWPLA. Possibly VL Pyörremyrsky can be printed from normal PLA but the plane will be too heavy for relaxed flying. Standard PLA printed model therefore could not be recommended for beginners. You should use heavyer battery also to compensate Center of Gravity of the plane in this case.