Element 3 Light from CLM Pro

Details

CLM Pro RC model Element 3 - Light has a 3m / 118" wingspan. Full house, REFA version and full composite parts made. Total ARF model weights 823 grams / 29.03 oz. Very easy and fast assembly and provides excellent performance and stability, it is very stable and is a joy to fly.

CLM Pro has released a new RC model Element 3 – light version – with a 3m / 118“ wingspan.
Due to its aerodynamic design and excellent performance, it is very stable and is a joy to fly. The model is constructed using full-carbon parts, so the strength - mass ratio is ideal. Total ARF model weights 823 grams / 29.03 oz.
The wing is made with flaps and ailerons, making it a full house (REFA) model. The model is exceptionally easy to fly with its small turn-radius. Furthermore, it can be effectively point-landed if needed, due to its big flaps, which also give the model amazing sailing characteristics.
The wing is constructed so that the center panel is angled while the mid and tip panels are angled, which gives the model excellent stability and easy handling during flight.
Since it is so light and its performance is excellent, the Element 3 is designed to fly in the F5J, ALES category and other competitions where you need to stand out when there are little or low thermals.

Model Element 3 comes in Rudder-Elevator-Flap-Aileron, REFA version.

Pictures

Radio icons

(Click on the icon you want to download)
Horus OpenTx
Horus FrOs
Standard
Silhouette
X9D/X9D+/X9E
Spektrum IX12
Futaba 18MZ
Jeti DS-24

Similar Models

Some content in menu 2.

Where to buy

USA
Aloft Hobbies
check web site
Ship to: USA

Winspan: 2995mm (117.9 in)
Length: 1730mm (68.1 in)

Weight: 823 g (1.8 lbs)
Wingspan: 2995 mm 117.91"
Length: 1730 mm 68.11"
Wing area: 64.32 dm2  996.96 sq. in.
Airfoils: AG 40-43 AG 40-43
Weight ARF: 823 g 29.03 oz
Control surfaces: REFA REFA

The wings have boxes for joiners and pre-prepared pins, making them ready for assembly, that is, you simply connect them one into another.
There are only a few things left to do: to glue the carbon tail boom to the pod, mount the vertical stabilizer to the end of the pre-prepared boom, repeat that with the V-mount, place the commands or connect the commands for the rudder, flaps and ailerons, and then join everything together. Finally, place the electronics and you are ready to fly.

Recommended Powertrains
Hacker B40 10L with 4.4:1 box, 15x9 prop, 3S 2Ah LiPo (58A, 2550 fpm)
XPower F2919 / 10, 1480 RPM, Light F5J,  11x6 prop, Hot LiPS VHD 1300 3S1P, 37A

Variants

Elmnt3L
Element 3 Light (Black-red)
Information
Read me
Recent Changes
This site is currently under development and may be unavailable time to time.
We are currently working hard to populate the database. Be patient, stay connected and read the info ...
AIR-RC
Copyright AIR-RC © 2019
Flag Counter