P3 Revolution from hangar 9

Details

The Hangar 9® P3 Revolution 60cc giant scale biplane is an exclusively licensed model of the radical new aircraft design for Skip Stewart Airshows. Like the full-size, the outline of the P3 Revolution 60cc is unconventional in practically every aspect. The actual aircraft Skip Stewart will fly in the very near future gets its lightweight specifications from advanced composite construction. World-class RC pilot, Mike McConville, has engineered this model using lightweight all-wood construction. It’s a level of durability that’s critical to hardcore 3D performance in this size class, plus it allows genuine UltraCote® film to deliver a finish that’s resilient as it is beautiful.

One look at the enormous double-beveled control surfaces and it’s easy to tell this airplane was purpose built for outrageous 3D maneuverability. In contrast, the stretched fuselage and high-aspect ratio of its tapered wings suggests precision aerobatics is within the performance envelope. When matched with the recommended Spektrum electronics and 60cc-size gas engine, you can tune this unique biplane any way you like. You’ll get vertical pull to yank this big bipe out of a hover, and the precision to wail through crank-shaft rollers and hard snap in ways that would red-eye any pilot in the full-scale world.

Convenience features like plug-in wings and stabilizers mean that getting the P3 Revolution to the field is no problem. Completed features like factory-hinged ailerons and elevators, a pre-drilled firewall, and a complete high-quality hardware package mean you won’t be at the work bench very long. Even a pilot figure with the likeness of Skip Stewart is included so you can experience the future of airshow aerobatics right at your home field.

Features:

  • Designed by world class RC pilot, Mike McConville
  • Exclusive, officially licensed P3 Revolution model
  • Engineered to deliver 3D performance in a precision biplane platform
  • Two-piece, plug-in wings with carbon-fiber joiner tube
  • Two-piece, plug-in horizontal stabilizers with carbon-fiber joiner tube
  • Laser-cut, all-wood construction that’s lightweight
  • Pre-drilled hinge locations for all control surfaces
  • Genuine UltraCote® film finish with complex graphics applied
  • Pre-drilled firewall that’s ready to mount your 60cc-size gas/petrol engine
  • Color-matching fiberglass cowl and wheel pants
  • Painted, high-strength aluminum landing gear
  • Complete, high-quality hardware pack, plus fuel tank included
  • Ball-link connectors and dual-plate fiberglass control horns
  • Painted pilot figure included

Pictures

Manual


If the Manual doesn't show you can click here to open the document in a new window.

Radio icons

(Click on the icon you want to download)
FrSky X20/X20s/XE Ethos
FrSky X18/X18s/TWIN Ethos
FrSky Horus OpenTx
FrSky Horus FrOs
Standard
Silhouette
FrSky X9D/X9D+/X9E
Spektrum IX12 & IX20
Futaba 18MZ
Jeti DS-24
Graupner MZ-16 & MZ-32
Radiomaster TX16S
Jumper T16 & T18 series

Similar Models

Some content in menu 2.

We cannot guarantee that the shops listed below do sell the P3 Revolution in particular but at least we know they do distribute hangar 9.

Where to buy

Ireland
Model Heli Service
check web site
Ship to: Ireland
France
Flash RC
check web site
Ship to: Europe
USA
TOWER HOBBIES
check web site
Ship to: International
Germany
Horizon Hobby Europe
check web site
Ship to: Europe
Usa
Horizon Hobby USA
check web site
Ship to: USA
Germany
Schweighofer GE
check web site
Ship to: Germany
Austria
Schweighofer AT
check web site
Ship to: International
Switzerland
Grischa Modellbau
check web site
Ship to: Switzerland
Ireland
Radio Controlled Shop
check web site
Ship to: Ireland
Switzerland
Scamora
check web site
Ship to: Switzerland
France
Absolu Modélisme
check web site
Ship to: France
United Kingdom
Als Hobbies
check web site
Ship to: United Kingdom
Belgium
Aerobertics
check web site
Ship to: Europe
France
Weymuller Modélisme
check web site
Ship to: France
USA
Atlanta Hobby
check web site
Ship to: USA
USA
AMain Hobbies
check web site
Ship to: USA
USA
Hobby Zone
check web site
Ship to: USA
United Kingdom
Model Shop Leeds
check web site
Ship to: United Kingdom
Austria
DMT
check web site
Ship to: Europe
Switzerland
ModellMarkt24
check web site
Ship to: Europe
USA
Gator RC
check web site
Ship to: USA
United Kingdom
tjd Models
check web site
Ship to: United Kingdom
Germany
Voltmaster
check web site
Ship to: Europe
Spain
ACRO RC
check web site
Ship to: Europe
France
miniplanes
check web site
Ship to: France

Wingspan: 1982mm (78 in)
Length: 2000mm (78.7 in)

Weight: 8600 g (19 lbs)
Airfoil Shape: Symmetrical
Approximate Assembly Time: 20+ Hours
CG (Center of Gravity): 5.875-6.25 in (149-159mm) behind the leading edge of the top wing at the center
Completion Level: Almost Ready-To-Fly
Engine Size: 62cc Gas
Flying Weight: 19 lbs (8600g)
Length: 78.7 in (2000mm)
Material: Balsa
Minimum Required Radio: 6 channel
Recommended Fuel: Gasoline
Recommended Receiver Battery: 3 x 2000mAh LiPo
Servos: 7 high torque and 2 standard required
Spinner Size: 4.5 in (114mm)
Trimscheme Colors: Black, Silver, True Red
Wing Area: 1817 sq in (117.2 sq dm)
Wingspan: 78 in (1982mm)

Variants

HAN4630
P3 Revolution ()
EnglishFrenchGermanItalianPortugueseRussianSpanish
3,574 models
(42,888 icons in the database)
ASK FOR A NEW MODEL TO BE ADDED

Although I do my best to complete this library, you may not find the model you are looking for.

In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.

I'm sometime asked to add a non flying model to this library but unfortunately, it's not the focus of this website

Ask for a new model

RANDOMIZER

Timber 110
Tiger Moth
NOTE

A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.

Your model aircraft is unique and you have spent a lot of time to make it what it is today. Get an icon that is worthy of the time you spent on it. For 5 US dollars we will design personal and unique icons, that nobody else will get, for up to 3 of your aircrafts.
More info soon, stay tuned...
Information
Read me
Recent Changes
AIR-RC is the largest online database about RC Model Flying and it's growing...
Each model has descriptions, specifications, photos, video, icons for your radio and links to shops and manufacturers.
We are not selling anything, it's made by RC hobbyists for RC hobbyists. Enjoy !
AIR-RC
Copyright AIR-RC © 2022