Explorer 5 Vtail from NAN Models

Details

The Nan Models Explorer 5 is designed to excel in the new category GPS Triangle Racing - Light Class. Nan gave this exciting class the attention it deserves by designing and producing a glider that fits perfectly in the category. The Explorer 5 can also be used as a F5J glider (especially for windy conditions) and for slope soaring in light to moderate conditions. Some people call the model Explorer Q5 and others Explorer 5.

The Explorer 5 airfoil is based on the successful Xplorer 2/3 airfoils (F3J and F5J champions), resulting in a wing that gives the glider the perfect combination of speed and good climb rate, which is very important in the GPS Triangle Light Class category.

The fuselage of the Explorer Q4 and 5 series is a masterpiece of design and composite engineering. Starting from the front, a 40cm long slim nosecone with a 16cm hatch holds the motor, speed control and flight battery. This is supplied to take a Servoramen 30mm firewall (blank one supplied but not glued into place). The length is a benefit as it allows lightweight (c 100g) motors to be used. However if a heavier powertrain is preferred the front could be shortened by approx 25mm and fitted with a 32mm firewall, and the rear could be cut down by approx 4cm while still allowing room for a good sized battery. The slim nosecones supplied with our Q5 models all have a kevlar/glass layup to assist with GPS reception.

Pictures

Radio icons

FrSky X10

FrSky X12s

Jumper T16

Jumper T18

Radiomaster TX16S

FlySky NV14

FlySky EL18

PNG (192x114)

FrSky X9D

FrSky X9E

BMP (64x32)

BMP (64x32)

FrSky X20

FrSky X20 Pro

FrSky XE

Kavan V20

PNG (300x280)

BMP Recommended (300x280)

FrSky X18

FrSky Twin

PNG (180x166)

BMP Recommended (180x166)

FrSky X10

FrSky X12s

PNG (180x160)

BMP Recommended (180x160)

FrSky X10

FrSky X12s

JPG (155x100)

Futaba 18MZ

JPG (158x80)

Graupner MZ16

Graupner MZ32

BMP (158x106)

Jeti DS-24

PNG (320x240)

Spektrum ix12

Spektrum ix20

JPG (266x164)

Similar Models

Some content in menu 2.


Wingspan: 4000mm (157.5 in)
Length: 1810mm (71.3 in)

Weight: 1900 g (4.2 lbs)
Construction CFK 2x
(GFK Nose)
Wing span 4000 mm
Wing area 86 dm²
Wing Profile NAN F3J
Length 1810 mm
Empty weight ~1150 g 
Flying weight from 1600-1900 g
Wing loading from ~19 g/dm²
Spinner Diameter 30 mm
Centre of Gravity 102 mm (V) / 135 mm (X)
Controls Rudder, elevator, ailerons, flaps, throttle
Motor recommended TS 1515/15T with 5:1,
TS 1515/16T with 5:1
Spinner recommended GM F5J 30mm, CN 30 Pro
Propeller recommended GM 14×9-F, PR11A, NAN 14×7.5
Servos recommended: Elevator & rudder, V-tail KST X08
Servos recommended: Flap MKS HV6130, KST X10 Mini
Servos recommended: Aileron  MKS HV6110, KST X08
IDS Yes, not inclued
Servo frame wings Not included
Wings wires Not included
Accu recommended 3S-4S 850mAh-1300  mAh
EnglishFrenchGermanItalianPortugueseRussianSpanish
4,522 models
(54,264 icons in the database)
ASK FOR A NEW MODEL TO BE ADDED

Although I do my best to complete this library, you may not find the model you are looking for.

In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.

Ask for a new model

Generate your own image

RANDOMIZER

Beta 1400
Miao 550 Pro
PhoenixS
CCCP L-39 Albatros G2
PENGUIN_2307
X20AWE_2403
GOGGLEX_2311
CINELOG25_2310
ALTUS_2404
T1VTOL
NOTE

A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.

Information
Read me
Recent Changes
AIR-RC is the largest online database about RC Model Flying and it's growing...
Each model has descriptions, specifications, photos, video, icons for your radio and links to shops and manufacturers.
We sell nothing, it's made by RC hobbyist for RC hobbyists. Enjoy !
AIR-RC
Copyright AIR-RC © 2024