Van s RV-4 30cc from hangar 9

Details

Among the hundreds of homebuilt aircraft designs that have taken flight over the years, few inspire pilot devotion like the Van's RV line of airplanes. Just ask any of the faithful. It doesn't matter which RV they fly. They will all testify to a balance of stability and nimble response that just makes you want to smile whenever you're at the controls. Master model designer, Ali Machinchy, has perfectly captured that Van's experience with this 30cc reproduction of the RV-4. It combines superb detail and thrilling flight performance to give pilots of almost any skill level a giant-scale experience unlike any other.

The Hangar 9® Van's RV-4 30cc ARF has been designed to make every step of your giant-scale experience as hassle-free as possible. It all starts with the assembly. The two-piece plug-in wing and horizontal stabilizer slide together on aluminum tubes and bolt into place. The large fuselage access hatch makes electronics installation easy, too. There's even a pre-assembled, self-aligning drill guide to speed the installation of whatever powerplant you decide to use, gas or electric. Once in the air, you'll find the model's wide flight envelope and forgiving flight characteristics just as easy to enjoy. It will do it all, from touch and gos to advanced aerobatics, with the same smooth, predictable response the full-scale version is famous for.

Features:

  • Expertly constructed with laser-cut balsa and plywood
  • Two-piece, plug-in wing and horizontal stabilizer make field assembly fast
  • Functional flaps and scale hinges add realism and a wider flight envelope
  • Wide-track wheel stance and leaf tail wheel for outstanding ground handling
  • Painted fiberglass cowl and wheel pants
  • Matching aluminum landing gear with painted fairings
  • Large top-hatch provides easy access to electronics and flight batteries
  • Detailed cockpit area features a scale pilot, instrument decal and crystal-clear canopy
  • A self-aligning drill guide makes all recommended power options easy to install
  • Operational LED landing lights pre-wired and installed
  • Easy to maintain, genuine Hangar 9® UltraCote® covering
  • Military-style and civilian decals included for trim scheme customization
  • Includes motor mount for the electric power option
  • Complete hardware kit includes a matching spinner and painted fiberglass control horns

Pictures

Manual


If the Manual doesn't show you can click here to open the document in a new window.

Radio icons

FrSky X10

FrSky X12s

Jumper T16

Jumper T18

Radiomaster TX16S

FlySky NV14

FlySky EL18

PNG (192x114)

FrSky X9D

FrSky X9E

BMP (64x32)

BMP (64x32)

FrSky X20

FrSky X20 Pro

FrSky XE

Kavan V20

PNG (300x280)

BMP Recommended (300x280)

FrSky X18

FrSky Twin

PNG (180x166)

BMP Recommended (180x166)

FrSky X10

FrSky X12s

PNG (180x160)

BMP Recommended (180x160)

FrSky X10

FrSky X12s

JPG (155x100)

Futaba 18MZ

JPG (158x80)

Graupner MZ16

Graupner MZ32

BMP (158x106)

Jeti DS-24

PNG (320x240)

Spektrum ix12

Spektrum ix20

JPG (266x164)

Similar Models

Some content in menu 2.

We cannot guarantee that the shops listed below do sell the Van s RV-4 30cc in particular but at least we know they do distribute hangar 9.

Wingspan: 2160mm (85 in)
Length: 1830mm (72 in)

Weight: 8600 g (19 lbs)
Airfoil Shape: Semi Symmetrical
Approximate Assembly Time: 15-20 Hours
Approximate Flight Time: 8 -12 mins
CG (Center of Gravity): 154 mm behind the leading edge of wing
Completion Level: Almost Ready-To-Fly
Engine Size: 30cc 2-stroke, 57-61cc 4-stroke (sold separately)
Flying Weight: 17-19 Lbs ( 7700- 8600g )
Landing Gear: Yes
Length: 72 in ( 1830mm )
Material: Balsa
Minimum Required Radio: 6-Channel (sold separately)
Minimum Speed Control: 100 amp (sold separately)
Motor Size: Power 160 (sold separately)
Propeller Size: 17x8 Gas, 18x8- 18x10 Electric (sold separately)
Recommended Motor Battery: 8-10s 4000-7000 Mah (sold separately)
Recommended Receiver Battery: 2200mAh 2S Li-Fe (sold separately)
Retracts: No
Servos: 8 (sold separately)
Spinner Size: 4" ( 101.6 mm )
Stabilizer Tube Length: 12.5" ( 317.5 mm )
Stabilizer Tube OD: 12mm
Trimscheme Colors: White HANU870, Deep Blue HANU873, Silver HANU881
Wing Area: 1551 sq in (100.1 sq dm)
Wing Loading: 25.3 oz/sq ft
Wing Tube Length: 31" (787.4mm )
Wing Tube OD: 1" (25.4mm )
Wingspan: 85" ( 2160mm)
EnglishFrenchGermanItalianPortugueseRussianSpanish
4,800 models
(57,600 icons in the database)
ASK FOR A NEW MODEL TO BE ADDED

Although I do my best to complete this library, you may not find the model you are looking for.

In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.

Ask for a new model

Generate your own image

RANDOMIZER

CT-114 Tutor
FW 190 D-9 Dora
Nano QX2 FPV
Wayfarer
T1VTOL
ALTUS_2404
GOGGLEX_2311
X20AWE_2403
CINELOG25_2310
PENGUIN_2307
NOTE

A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.

Information
Read me
Recent Changes
AIR-RC is the largest online database about RC Model Flying and it's growing...
Each model has descriptions, specifications, photos, video, icons for your radio and links to shops and manufacturers.
We sell nothing, it's made by RC hobbyist for RC hobbyists. Enjoy !
AIR-RC
Copyright AIR-RC © 2024