Vortigaunt FPV from e-wings

Details

Every Freeman should have one. The first in the e-wings lineup, designed from the ground up with smooth, stable FPV flying in mind. Room for large batteries (will fit 2x 5200mah 4S multistars side by side!) and separate electronics bay for autopilot goodness. 

Available in either white or black high density EPP (exactly the same foam for both, just the colour is different).

The kit contains:

  • Full precision cut high quality EPP 1.22m wingspan airframe:
    • 2x wings with pre-cut spar slots
    • Center section with pre-cut spar slot
    • Sidewalls + re-enforcement pieces
  • 8mm main carbon spar
  • 6x carbon strip spars
  • Correx bay covers + vertical stabilisers
  • Balsa elevon sheet
  • High quality control horns + linkages
  • Vinyl decals
  • 3D printed (PETG) motor mount
  • 3D printed (PLA) stabiliser mounts

Pictures

Radio icons

FrSky X10

FrSky X12s

Jumper T16

Jumper T18

Radiomaster TX16S

FlySky NV14

FlySky EL18

PNG (192x114)

FrSky X9D

FrSky X9E

BMP (64x32)

BMP (64x32)

FrSky X20

FrSky X20 Pro

FrSky XE

Kavan V20

PNG (300x280)

BMP Recommended (300x280)

FrSky X18

FrSky Twin

PNG (180x166)

BMP Recommended (180x166)

FrSky X10

FrSky X12s

PNG (180x160)

BMP Recommended (180x160)

FrSky X10

FrSky X12s

JPG (155x100)

Futaba 18MZ

JPG (158x80)

Graupner MZ16

Graupner MZ32

BMP (158x106)

Jeti DS-24

PNG (320x240)

Spektrum ix12

Spektrum ix20

JPG (266x164)

Similar Models

Some content in menu 2.

We cannot guarantee that the shops listed below do sell the Vortigaunt FPV in particular but at least we know they do distribute e-wings.

Where to buy


Wingspan: 1220mm (48 in)
Length: 530mm (20.9 in)

Weight: 2000 g (4.4 lbs)

Main Material: High density EPP foam (CNC hot wire cut)
Motor Mount Material: PETG
Wingspan: 1.22m
Fuse Length: 53cm
Battery Bay dimensions: 7x18x5.4 cm (WxLxH)
Electronics Bay dimensions: 9x12x4 cm (WxLxH)
Dry Weight (assembled, no laminate): ~900g
Fully Loaded Weight (FPV kit plus batteries): 1.4 - 2.0 kg
Laminate pack - 4m of 75 micron clear heat adhesive laminate.

Recommended setup
Motor: Turnigy 3536 1400kV SK3 
Prop: 8x5 (Graupner E-Prop is an excellent choice)
ESC: 60A
Battery: 5000mah(+) 4S
This setup works well, pulls about 50A on launch, 40A WOT and is good for about 90mph! Will cruise around 10A or lower if you don't mind going slow! ;)
Metal gear servos with a torque of about 2.5kg will be plenty.

EnglishFrenchGermanItalianPortugueseRussianSpanish
4,859 models
(58,308 icons in the database)
ASK FOR A NEW MODEL TO BE ADDED

Although I do my best to complete this library, you may not find the model you are looking for.

In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.

Ask for a new model

Generate your own image

RANDOMIZER

Addiction V2 LEDs
Devil X360
Banshee Bype G-BOOK
FRSKYX14_2312
GOGGLEX_2311
X18RS_2412
GX12_2412
T1VTOL
X20AWE_2403
NOTE

A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.

Information
Read me
Recent Changes
AIR-RC is the largest online database about RC Model Flying and it's growing...
Each model has descriptions, specifications, photos, video, icons for your radio and links to shops and manufacturers.
We sell nothing, it's made by RC hobbyist for RC hobbyists. Enjoy !
AIR-RC
Copyright AIR-RC © 2024