These files are large, so be patient during the download. OpenTX users, please read the readme.txt included in the ZIP
The Limited Edition Kingcraft Super Stearman is a beautifully finished and highly detailed scale model of this powerful aerobatic biplane. The Stearman is provided in an almost ready to fly format and with some specific assembly procedures to follow. Because of this, it is recommended for modelers with previous ARF assembly experience. Once built you will be rewarded with a stunning looking airplane that performs just like the full size when used with a 1200~1300W motor and 6S Lipoly battery. The detailing includes a realistic dummy engine, raised panels, authentic instrument panel, scale cockpit with pilot, detailed rigging, and dummy oleo struts, all this adds a touch of ultimate realism. Due to this being a "Limited Edition" there is only a certain number of kits available, so don't delay in acquiring one of these beautiful models to add to your collection.
Kingcraft has faithfully reproduced Susan Dacy's "Big Red" Super Stearman which is fitted with a fire-breathing supercharged 450hp Pratt and Whitney engine, this completely transformed its aerobatic capabilities over the original trainer version. The model is constructed mainly of balsa and plywood which is then finished in a high-quality covering leaving only the decals to be applied. Scale details such as the turtle deck, raised paneling, cowl, wheel pants, etc are made from either fiberglass sheet or fiberglass moldings. A very complete hardware pack is supplied which includes a polished aluminum spinner, main wheels, steerable tailwheel assembly, complete RC linkage set, nuts and bolts, and anything else necessary to complete the model. You will only require, glue, motor, ESC, battery, and RC equipment.
Due to the Stearman having a very short nose, a unique removable fiberglass battery tray has been designed to allow the battery to be installed as far forward as possible. This tray is held in place with a thumbscrew and removes the need for any extra ballast to obtain the correct C of G. To fit the aluminum spinner you will require a brushless motor with a reversed shaft, please see related products for the recommended Propdrive motor. Features:
If the Manual doesn't show you can click here to open the document in a new window.
FrSky X10
FrSky X12s
Jumper T16
Jumper T18
Radiomaster TX16S
FlySky NV14
FlySky EL18
PNG (192x114)
FrSky X9D
FrSky X9E
BMP (64x32)
FrSky X20
FrSky X20 Pro
FrSky XE
Kavan V20
PNG (300x280)
BMP Recommended (300x280)
FrSky X18
FrSky Twin
PNG (180x166)
BMP Recommended (180x166)
PNG (180x160)
BMP Recommended (180x160)
JPG (155x100)
Futaba 18MZ
JPG (158x80)
Graupner MZ16
Graupner MZ32
BMP (158x106)
Jeti DS-24
PNG (320x240)
Spektrum ix12
Spektrum ix20
JPG (266x164)
Some content in menu 2.
Top Wing Span: 1400mm (55.1") Bottom Wing Span: 1383mm (54.4") Total Wing Area: 59.43sq.dm (884.6sq.in) Fuselage Length: 1110mm (43.7") Flying Weight: 2700~2900g Required (Not Supplied):
Although I do my best to complete this library, you may not find the model you are looking for.
In this case, do not hesitate to ask me to add it : You're not bothering me. Please be patient, depending on my workload, I may take a few days to work on your model and gather information.
Ask for a new model
Generate your own image
A simple 'thank you' or a kind message is my first salary but if you think this website is useful, if you like the content, the service and if you want to participate to the hosting, feel free to donate. I thank you in advance.