The 120cm span Acrobat 3D BL RR is an ultralight 3D superstar that pilots can have ready for extreme stunts for a minimum investment in time and effort. Like both sailplanes, it offers the convenience and extra value of a factory-installed brushless motor, ESC and servos.
Just one look at the massive control surfaces and you can see that the new ST Model Acrobat is capable of serious 3D performance. And it doesnt disappoint! Knife edge loops, stable harriers and waterfalls are well within the models capability.
Some content in menu 2.
|Winspan: 1200mm (47.2 in)|
|Length: 1340mm (52.8 in)||
|Weight: 1700 g (3.7 lbs)|
Wing Area: 586sq in (37.8sq dm)
Wing Loading: 14.75oz sq ft (45.0g/sq dm)
Center of Gravity (CG): 5.5" (140mm) back from the leading edge of
the wing measured at the fuselage, CG must not exceed 0.39" (10mm)
Wing: Two-piece with carbon rod and side-force generators
Aileron Control: Dual servo
Motor: Brushless outrunner
Electronic Speed Control: 40A
Servos: Four preinstalled (2-aileron, 1-rudder, 1-elevator)
Landing Gear: Main, one-piece prebent wire with 2.5" (63mm) foam
wheels, prebent tail wire with 1" (25.4mm) foamwheel
Propeller: 13x4" plastic, black in color
Spinner: Two 2" (51mm) diameter foam, white in color